Re: [bascom] RC5

["M.C.Alberts" <mark@mcselec.com>]

Hi Eric,

Thanks for the feedback. It seems to work for everybody now :-)
Now only the sending code ...

I used an AVR application note from Atmel to get the details about RC5
and some articles from elektor. (yes it will go into AVR too)

22 MHz is probably too fast for the single byte counters I use.

The current GETRC5 routine works well but I am not satisfied with it
because it uses too much stack space. So I will rewrite it later. 

Best regards,

Mark Alberts

Eric Le Baron wrote:
> 
> Mark,
> 
> Just checked your attached RC5 program and it works now with 7.3728MHz,
> 11.0592MHz and with 12MHz Xtal.
> Even without re-compiling for the higher freq.
> With 22.1184MHz (which I always use) and 24MHz it didn't work for me.
> Maybe in the next update it will ??
> I used a French Philips RC9031 remote.
> 
> Some time ago Jure was looking for technical info on RC5.
> Where did you find the required info to be able to program the RC5 routine ?
> I'm also interested as I want to be able to use non-RC5 remotes.
> 
> Thanks,
> 
> Eric Le Baron
> Wageningen
> The Netherlands