Re: Fw: [bascom] BASCOM-8051 beta 2.06 + new passwords

[Don McKenzie <don@dontronics.com>]

Sorry Mark,

I have been going through all these requests for new passwords for
bascom-8051, and as there was user confusion about which product it
related to, I joined this list to let users know that it was not much
good sending me requests for new passwords for bascom-avr.

When I got the message below via the list, I made the assumption that it
was another private request, and did a cut, paste, and reply, and then I
noticed the reply to address.

As the blue graphic line of my browser crept onto nearly fully sent, I
hit cancel.
Been waiting for an hour and a half checking to see if the message
appeared in the archives, and thought I had caught it, but alas, sorry,
I think you need to do the password thing again.

What can I say?
My most humble apologies.
Don...



Don McKenzie wrote:
> 
> Thank you for using BASCOM-8051
> 
> This file contains some additional info on BASCOM-8051.
> 
> ************************************************************************
> When you don't see the Interrupt buttons in the simulator you need to
> install
> a newer version of the comctl32.dll.
> You can download the file  40comupd.exe from microsoft.
> *************************************************************************
> On windows NT you need Administrator rights to install BASCOM.
> You also need to run it at least once as an Administrator to install the
> IO port driver
> After BASCOM has runned once you can log in as a user without Admin
> rights too.
> *************************************************************************
> 
> - If you run into problems send an email to 8051@mcselec.com
>   with the problem and if possible the source code.
> 
> - Check out the sample files which contain info on the syntax.
> 
> - Check out our website regulary for application notes.
>   If you have a nice application which you want to share with other
>   users you can send it to MCS Electronics.
> 
> - If you have suggestions on how to improve the program
> (environment/statements etc.) mail us.
>   We need your help to make BASCOM-8051 better!
> 
> ***************************** UPDATES
> ****************************************
> 
> An update of the BASCOM-8051 library can be downloaded from our website
> when
> it is available. Your product is shipped with system module version 2.XX
> You can look up the versionnumber in the Aboutbox.
> Updates will have minor improvements and/or bugfixes.
> The webpage will show the version, which is available.
> 
> To get the update:
> 
> Download the MCS Update utility.
> Install it in the same directory as BASCOM-8051.
> Run the MCS Auto setup program and fill in the unzip password :
> #b8051#2001!_932434535$#
> It is best top copy and paste the password btw.
> Now press Start and the program will check for newer files and will
> download and install them
> when available.
> 
> Or do it manual:
> 
> Point your webbrowser to the following site :
> http://www.mcselec.com/download/bascom-8051/basltupd.zip
> This will cause your browser to download the zipped file.
> 
> After downloading the file, you must place it into a temporary
> directory.
> Unzip the file with the command :
> PKUNZIP  basltupd   -s#b8051#2001!_932434535$#
> !!! Note that there is NO space between -s and the password. Also note
> that the password must be typed exactly as shown!
> !!! The -s is a PKUNZIP command line parameter for unzipping encrypted
> files.
> For WINZIP or WINUNZIP you dont need to enter the -s
> 
> When the BASC5132.DLL file is unzipped copy it to the BASCOM application
> directory.
> (the file can only be copied when BASCOM is not loaded)
> Your update is now ready. When you have questions please email us.
> 
> To view the download page go to :
> http://www.mcselec.com/download.htm
> 
> To get an update of the IDE:
> http://www.mcselec.com/download/bascom-8051/baside.zip
> 
> To get an update of the HELP file:
> http://www.mcselec.com/download/bascom-8051/bashelp.zip
> 
> To get an update of the SAMPLES:
> http://www.mcselec.com/download/bascom-8051/samples.zip
> 
> To get an update of the BASCOM Language Reference(not provided on disk)
> http://www.mcselec.com/download/bascom-8051/basref32.zip
> 
> The IDE ZIP-file can be unzipped with the same password as used for the
> library.
> 
> If you want to receive an email when a new update is available send us
> an
> email with the subject 'INFO ON UPDATE BASCOM-8051' and your
> serialnumber.
> 
> Last but not least, we want to point out that we are always glad with
> feedback.
> 
> For example:
> - Do you like the product yes/no  : why
> - Does it work as advertised
> - Which parts don't you like
> - Which parts do you like
> - Which additional features do you need
> - What kind of applications do you make
> - etc.
> 
> RickAAlvarez@cs.com wrote:
> >
> > Hi Don,
> >
> > I bought both Bascom AVR and Bascom 8051 from you.
> > My Bascom 8051 serial number is DT-9704-00052, please send me the new
> > password.
> >
> > Thanks for your support,
> >
> > Rick
> 
> --
> Don McKenzie    mailto:don@dontronics.com      http://www.dontronics.com
> 
> The World's Largest Range of Atmel/AVR  & PICmicro Hardware and Software
> Free Basic Compiler and Programmer http://www.dontronics.com/runavr.html
> The Little "rAVeR!" AVR & Basic Kit http://www.dontronics.com/dt006.html

-- 
Don McKenzie    mailto:don@dontronics.com      http://www.dontronics.com

The World's Largest Range of Atmel/AVR  & PICmicro Hardware and Software
Free Basic Compiler and Programmer http://www.dontronics.com/runavr.html
The Little "rAVeR!" AVR & Basic Kit http://www.dontronics.com/dt006.html